OTHER
PRODUCT: |
 | OUR MAIN DISTRIBUTOR:
NIPPON PAINT, SEAMASTER PAINT AND ALVAN PAINT (IRAN) | | |
| 
| | CEMENTATION PRODUCT | | A. PORTLAND CEMENT | | | | | | | B. HOLCIM | | | | | | | C. LAFARGE | | | | | | D. N.S. | | | | | |  | | | | | | WATERPROOF CEMENTATION PRODUCT | | A. SIKA | | | | | | B. PYE | | | | | | C. HOLCIM | | | | | | | | | | | | STEEL PRODUCTS | | Steel Bar –
HTDB (High Tensile Drawn Bar)
 | Use of steel bar as a construction material used extensively in construction industry because of its great flexibility, which makes it suitable for a variety of uses. It is faster, costs lower, lighter in weight, easier to maintain, carry a reduced risk of fire, and are earthquake resistant. One of the major advantages of steel, from both an environmental and an economic point of view, is that it can be recycled again and again without it suffering any loss of quality.
Available with us, is a wide variety of mild steel bar sizes that could be utilized in general construction, cement related industries as well as other fields such as petrochemicals, distilleries, processing mills and etc. Known for their high tensile strength and resistance to wear and tear, these bars comes in choices of High Tensile Deformed Bars and Mild Steel Round Bars for both BS and CQ quality. |
| |  | | | **** preferred sizes & specification by industries | | | | | | Round Bar – HTDB (High Tensile Drawn Bar) | |  | | | ITEMS (T x L x Q/BDL) | TICKNESS | REMARKS | | R4MM X 10M X 336 PCS | 3.0MM | | | R5.2MM X 10M X 320 PCS | 3.8 - 4.0MM | * * * * * | | R5.5MM X 10M X 320 PCS | 4.8 - 5.0MM | * * * | | R6.5MM X 10M X 149 PCS | 4.8 - 5.0MM | * * * | | R7MM X 10M X 149 PCS | 6.4MM | | | R8.2MM X 10M X 84 PCS | 6.5MM | | | R9MM X 10M X 168 PCS | 7.0M | | | R10MM X 10M X 138 PCS | 8.0MM | | | R12MM X 10M X 96 PCS | 10MM | | | R6MM X 10M X 320 PCS (BS) | 5.4 - 5.6MM | British Standard (BS)12M |
| | | | | | Size Tolerance & Ovality | | | Surface Condition | Size Tolerance | Ovality | | BS | 13 | Max. 70% of size tolerance | | 35 | | 50 | | 80 | | CQ | Level of h8 ISO | Max. 30% of size tolerance |
| | | Smooth Round Bars in length and bundled | | Purpose :
1. Concrete Reinforcement
2. Commercial and Manufacturing
Packing: Manually tied with doubled 5.5mm annealed rod at evenly spread intervals.
Weight: ±2000kg
| | Rolling tolerances Specification – DIN EN 10060 as per the applicable steel specification
tolerance table. | | Workability: Excellent for welding, drilling Machinery, Sawing & Forming
Applications: Frames, Brackets, Stakes, Spears, Ornamental Work etc
**** preferred sizes & specification by industries, CQ size for our Mill
* Any sizes required can be manufactured.
| | | | | | | | COIL MATERIAL | | A. PPGI | | 
| | EMICO ENTERPRISE SDN. BHD. trade & manufacturing on a full range of PPGI Coil to satisfy the various product applications and service environment at home, factory, office, commercial properties, advertising, cold room, clean room, transportation barns and sheds.
Application & Usage of PPGI Coil (Prepainted Galvanised Steel Coil)
1. Building
Exterior: Roofing, Awnings, Wall Cladding, Gutters, Sandwich Panels, Shutters,
Pre-engineered Building System
Interior: Walls & Partition, Ceiling Strips
2. Transportation
Road and Highway Signs, Number Plates, Aircraft Hangers, Bus Shelter
3. Commercial
Display Shelving, Signage & Bill Board, Cold Room Wall Panels, Clean Room Wall Panels
4. Household Electrical Goods
Freezers, Washing Machine, Tumble Dryer, Appliance Control Panels, Oven and Microwave Ovens,
Hi-fi, Computer Casings, Small Electrical Appliances
5. Furniture
Steel Furniture, Venetian Blinds | | | | | Specification
| | | Items | List | | *(BMT) Thickness 0.176mm – 0.40mm | Width : 914mm | | Zinc Coating Mass | Z08, Z12, Z15, Z18, Z20, Z22 | | Colour Consist of: | Deep Maroon, Fina Blue,Yodo Green, Econ Beige, Econ Gold, Advertising White, Mega Blue, Yodo Blue, Paradise Blue | | The Advantage of Mingu PPGI | - Provide moderate to long life span with low maintenance costs.
Good formability and durability allows engineering and architectural freedom - Able to be deep drawn, roll-formed, stamped and brake pressed without damage to the paint surface finish
- Resistant to Dirt and Corrosion
- Tolerance Thickness : 0.03mm±
|
| | *The standard nominal thickness refer to the thickness of the base metal (BMT).
| | B. GI | | | |  |  |  | | | | Zinc Coating (As per JIS G3302) | | Z08, Z12, Z18, Z22, Z27 |
|
| | Galvanized steel coils are made on the basis of Cold-rolled steel coil, Hot-rolled and acid-washed steel coil. | | Materials Specifications For GI Galvanised Steel Coil | | | | | Galvanised Steel Coils | | No | Type | Name | | 1 | Hard Quality | SGCH | | 2 | Soft Quality | SGCC | | 2 | Semi- Hard | SGC440 |
| | | | | | | Available Sizes | | Type | Thickness | Length / Width (mm) | | Hard Quality (SGCH) | 0.176mm - 1.20 mm | 914 or 1219 |
| | | | | | | Surface Finish | | Type | Surface Finish | | Regular Spangle | A coating having spangle that result of unrestricted | | growth of zinc crystals during normal solidification | | A standard spangle that suited for general use | | Minimized Spangle | A spangle obtained by restricting normal spangle formation to minimum | | The minimized spangles make this finish suitable for general painting applications | | Zero Spangle | Spangle Free |
| | | | | | | Our Services Included | | Shearing | 1 | | Slitting | 2 | | Fabricating | 3 | | Forming | 4 | | Recoiling | 5 |
|
| | | | C. EG | | | | | | | | D. GA | | | | | | E. PPGL | | | | | | | | | | | | PVC PIPE MANUFACTURING | | A. MPI BRAND | | | | Non-Pressure Pipes (MS 628, MS 762, BS 3505, BS 3506)
Non-pressure pipes include tubes, corrugated pipe, structured wall pipe, and ducting.
Typical requirements
Non-pressure pipes must primarily offer long life, strength, and resistance to corrosion and abrasion, as well as low installation costs.
A key example is plastic sewer pipes, which have adequate strength for earth loads and high chemical resistance — meaning long life when used for sewer installations
Pressure: non- and low-pressure applications
Temperature: 0-40°C | | | | | Applications and relevant Dow resins
Non-pressure pipes are primarily used for sewage, drainage, storm drains, and telecom applications. Because it is primarily laid beneath the ground surface, the conduit must possess outstanding strength and durability and be resistant to aggressive soils and chemicals. It must also have good abrasion resistance. | | | Inches | Thickness
(mm) | Class
O | Class B
PN 6 | Class C
PN 9 | Class D
PN 12 | Class E
PN 15 | Class
AE | Class
6 | Class
7 | | 1/2” | 15 |
|
|
| ● | ● |
| ● | ● | | 3/4" | 20 |
|
|
| ● | ● |
| ● | ● | | 1” | 25 |
|
|
| ● | ● |
| ● | ● | | 1 – 1/4” | 32 | ● |
|
| ● | ● |
| ● | ● | | 1 – 1/2" | 40 | ● |
|
| ● | ● |
| ● | ● | | 2” | 50 | ● |
|
| ● | ● |
| ● | ● | | 2 – 1/2” | 65 | ● |
|
| ● | ● |
|
|
| | 3” | 80 | ● | ● | ● | ● | ● |
| ● |
| | 4” | 100 | ● | ● | ● | ● | ● |
|
|
| | 6” | 155 | ● | ● | ● | ● | ● |
|
|
| | 8” | 200 | ● | ● | ● | ● | ● | ● | ● |
| | 10” | 250 |
| ● | ● | ● | ● | ● | ● |
| | 12” | 300 |
|
|
| ● | ● | ● | ● |
Note: The symbol of (●) in the table box, indicated the available sizes of the product. Sizes is vary from time to time. We provide OEM services to our customers. | | | | | UPVC Pressure Pipes
UPVC pressure pipes application for water supply or industrial use with pressure rating from 6 bar to 40 bar. Generally standard colour is grey and white. This product complied with standard of MS628 [BS 3505 (for water supply)] and MS 762 [ BS 3506 (for industrial used)]. | | | Inches | Thickness
(mm) | Class
O | Class B
PN 6 | Class C
PN 9 | Class D
PN 12 | Class E
PN 15 | Class
AE | Class
6 | Class
7 | | 1/2” | 15 |
|
|
| ● | ● |
| ● | ● | | 3/4" | 20 |
|
|
| ● | ● |
| ● | ● | | 1” | 25 |
|
|
| ● | ● |
| ● | ● | | 1 – 1/4” | 32 | ● |
|
| ● | ● |
| ● | ● | | 1 – 1/2" | 40 | ● |
|
| ● | ● |
| ● | ● | | 2” | 50 | ● |
|
| ● | ● |
| ● | ● | | 2 – 1/2” | 65 | ● |
|
| ● | ● |
|
|
| | 3” | 80 | ● | ● | ● | ● | ● |
| ● |
| | 4” | 100 | ● | ● | ● | ● | ● |
|
|
| | 6” | 155 | ● | ● | ● | ● | ● |
|
|
| | 8” | 200 | ● | ● | ● | ● | ● | ● | ● |
| | 10” | 250 |
| ● | ● | ● | ● | ● | ● |
| | 12” | 300 |
|
|
| ● | ● | ● | ● |
Note: The symbol of (●) in the table box, indicated the available sizes of the product. Sizes is vary from time to time. We provide OEM services to our customers.
| | | We also supply of Industrial pipe, tube and fittings standards and specifications from Chemical Engineering (JIS K 6741:2004 )-Unplasticized poly(vinyl chloride) (PVC-U) pipes | | | | | | Inches | Thickness
Diameter
(mm) | Class
AE | Class
AW | Class C
AEO | | 6” | 155 | ● | ● | ● | | 8” | 200 | ● | ● | ● | | 10” | 250 | ● | ● | ● | | 12” | 300 | ● | ● | ● | | 14” | 350 |
|
| ● |
|  |
| | | Note: The symbol of (●) in the table box, indicated the available sizes of the product. Sizes is vary from time to time. We provide OEM services to our customers. | | | | | UPVC S.W.V Pipes
S.W.V are abbreviated from Soil, Waste and Ventilating pipes with complied to MS 1063 (BS 4514) and MS 978 (BS 5255), MS 979 (part 1- BS 4660), MS 979 (part 2- BS 5481)which intended to use for soil and waste discharge pipe-work for conveyance waste water, ventilation pipe-work associated and rainwater pipe-work within the building structures. Pipes available in the sizes ranges from 32mm to 355mm as per table shown :- | | | Nominal Size | BS 5255 | BS 4514 | BS 4660
(Part 1) | BS 5481
(Part 2) | MS 978
(White) | MS 1063
(White) | MS 979
(Brown) | MS 979
(Brown) | | Inches | Thickness
(mm) | 4 Meter | 6 Meter | 4 Meter | 6 Meter |
|
| | 1 – 1/4” | 32 | ● | ● | ● | ● |
|
| | 1 – 1/2" | 43 | ● | ● | ● | ● |
|
| | 2” | 55 | ● | ● | ● | ● |
|
| | 3” | 82 |
|
| ● | ● |
|
| | 4” | 110 |
|
| ● | ● | ● |
| | 6” | 160 |
|
| ● | ● | ● |
| | 8” | 200 |
|
|
|
|
| ● | | 10” | 250 |
|
|
|
|
| ● | | 12” | 315 |
|
|
|
|
| ● | | 14” | 355 |
|
|
|
|
| ● |
| | | Note:The symbol of (●) in the table box, indicated the available sizes of the product. Sizes is vary from time to time. We provide OEM services to our customers. | | 
| | | | | |
|
